Products

HOME > Products > Built Scale & Corrosion Inhibitors and Pretreatment Filming Agents> YF-682 Scale and Corrosion Inhibitor for Low Hardness Water

YF-682 Scale and Corrosion Inhibitor for Low Hardness Water

YF-682 Scale and Corrosion Inhibitor for Low Hardness Water

产品详情

Properties

YF-682 is built with surfactant, dispersant, corrosion inhibitor, etc. It is suitable for system using soften water and other low hardness water as cool media. Because there are little contents of Ca2+ and Mg2+ ions in soften water, scale cannot be formed. Many corrosion inhibitors use Ca2+ and Mg2+ ions in water system to form protection membrane on metal surface, but there are little contents of Ca2+ and Mg2+ ions in soften water, the corrosion inhibition is a difficult question for soften water system. Through experiments, we develop this greenish scale and corrosion inhibitor for soften water system. YF-682 is a composite corrosion inhibitor by inhibition of metal polarization. YF-682 has no contents of such noxious subjects as nitrite and chromate, no pollution to environment, its corrosion ratio to carbon steel far lower than that of national standard.


Specification

project

index

Appearance

yellow transparent liquid

Solid content,%

30.0 min

pH (1%water solution)

3.0±1.5

Density(20℃) , g/cm3

1.20 min


Usage

Add YF-682 into plastic pool (or box) every day, dilute with water and continuously add into inlet of dosage pump or metering valve (outlet of collecting tank). The dosage of 30-70ppm is preferred.


Package and Storage

200L plastic drum,IBC(1000L),customers’ requirement. Storage for ten months in shady room and dry place.


Safety Protection

Acidity, Avoid contact with eye and skin, once contacted, flush with water.